Magnum Pumping Station: Original Series
SUPER QUIET AND EASY TO MAINTAIN
Our Magnum Pumping Stations run quietly and smoothly with little vibration for less wear and tear on equipment and operators. They’re powerful too, providing a superior quality high-pressure car wash pumping station for all system needs, from 8 to 35 GPM.
FEATURES
- High-pressure equipment system supply
- Output capacity of up to 35 GPM
- 50 U.S. gallon water capacity
- Low water level sensor
- Operates with fresh or recycled water
- In-line strainer to protect pump and prevent clogging
- Automatic fill valve
- Overflow manifold mounted to tank to keep motor dry in case of overflow
- Separate structure for tank and pump with electric motor for better vibration control
- Patented Isolastic Suspension eliminates damaging vibrations and reduces back-room noise
- Laser-straight belt tensioning system controls over belt alignment, reducing belt wear
- State-of-the-art, all-plastic, corrosive-proof float valve
- Requires minimal backroom space
TECHNICAL DATA
M1000R:
Electrical Motor:
- 230/460 VAC, 60 Hz
- Rated output = 7.5 HP
- Full load speed = 1760 RPM
- Three-phase, four pole
- Continuous duty
System Pump:
- Max speed capacity = 1450 RPM
- Max flowrate = 8 GPM
- Delivery at max PSI = 185 REV./USG
- Max inlet pressure = 250 PSI
- Max discharge pressure = 1000 PSI
- 1” NPT inlet port
- ¾” NPT discharge pump
Water:
- 1/2″ high-pressure system line
- 1″ overflow line
- 3/4″ unloader line to break
- 1” pump inlet line
M2000R 20 GPM 15 HP:
Electrical Motor:
- 230/460 VAC, 60 Hz
- Rated output = 15 HP
- Full load speed = 1760 RPM
- Three-phase, four pole
- Continuous duty
System Pump:
- Max speed capacity = 1150 RPM
- Max flowrate = 20.2 GPM
- Delivery at max PSI = 57 REV./USG
- Max inlet pressure = 250 PSI
- Max discharge pressure = 1000 PSI
- 1 ½” NPT inlet port
- 1” NPT discharge port
Water:
- 1” high-pressure system line
- 1” overflow line
- ¾” unloader line to break
- 2” pump inlet line
M3500R 35 GPM 25 HP:
Electrical Motor:
- 575 VAC, 60 Hz
- Rated output = 25 HP
- Full load speed = 1770 RPM
- Three-phase, four pole
- Continuous duty
System Pump:
- Max speed capacity = 1150 RPM
- Max flowrate = 34.5 GPM
- Delivery at max PSI = 29 REV./USG
- Max inlet pressure = 250 PSI
- Max discharge pressure = 1000 PSI
- 2 ½ ” NPT inlet port
- 1 ¼ ” NPT discharge
Water:
- 1” high-pressure system line
- 1” overflow line
- ¾” unloader line to break
- 2 X 2” pump inlet line